Labstrong Rapids Water Deionizer

Product Description
The Rapids is an analytical type I system that features timed dispense with up to 2 liters/minute of ASTM type I water. It can reach resistivity levels of up to 18.2ohm/cm and depending on the feed water and maintenance of the system, can also reach TOC levels as low as 5ppb or less. The Rapids has a standby mode that helps reduce degradation of the cartridges by recirculating water and can also extend the life of the pump. The Rapids Water Type I Purification System is simple to install and can be used with pretreat or tap water hook up. The small footprint of the system takes up little space on the wall.

The graphical touchscreen's interface is user friendly and is a helpful tool. The interface will provide notifications for things such as when cartridges are nearing exhaustion, give the user prompts and animations to walk them through installation or replacement of cartridges, cleaning the unit, purging air and more. Plus, QR codes embedded in the interface allow users to access things such as troubleshooting, downloading the user manual, ordering cartridges etc.

For cartridge kits, there are six (6) available to choose from depending on the feed water for the system:
Tap DI Feed Low Organic
Tap Feed Low Organic
Tap Feed Type 1
Tap DI Feed Type 1
RO Distilled Low Organic
RO Distilled Type 1

FEATURES:
Economical
Up to 2 liters/minute of ASTM Type I Water - up to 18 megohm-cm
Time Dispense
Graphical Touchscreen with helpful prompts and animations
Displays Real Time Resistivity Reading
Standby Mode - water will recirculate for five minutes every 30 minutes
Quiet Recirculation Pump Operation
Easy to Install/Replace Cartridges
Helpful How-To Videos for installation, maintenance, cleaning and part replacement.
Simple Cartridge Reorder with LabStrong LinkÖ
Easily Access the User Manual by scanning a QR code on the screen

SPECIFICATIONS:
~ Max Inlet Pressure: 100
~ Max Flow Rate: Up to 2 liters per minute
~ Temperature Range: 40 to 104 degrees Fahrenheit (Warning: Do Not Allow Cartridge to Freeze)
~ Type: I Reagent Grade Water
~ Resistivity: up to 18.2 megohm-cm
~ Characteristics: Analytical Type I water purification system
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Labstrong Rapids Water Deionizer or copy the following into your browser address window: labequip.com/stock/pictures/n2009.pdf
Made in USA.

ACCESSORIES:

REQUIRED ACCESSORIES:
cartridges

OPTIONAL ACCESSORIES AVAILABLE AT ADDITIONAL COST:
D00331 Pretreat Colloid/Organic Removal Cartridge
D00332 Mixed Bed High Purity Cartridge
D00333 Organic Removal Cartridge
D00334 Two Bed High Capacity Cartridge
D00335 Pretreat Type 1 Cartridge
D00336KT Tap/DI Feed Low Organic Cartridge Kit
D00337KT Tap Feed Low Organic Cartridge Kit
D00338KT Tap Feed Type I Cartridge Kit
D00339KT Tap/DI Feed Type 1 Cartridge Kit
D003310KT RO/Distilled Low Organic Cartridge Kit
D003311KT RO/Distilled Type 1 Cartridge Kit
FL0016-1 Final Filter
FL-001 Air Filter
CMX25LS Cleaning Syringe

---