Product Description
***The Lovibond MD1010 colorimeter is directly comparible to the HACH DR300 Single Parameter Colorimeter***
The MD 100 photometer is a convenient choice for testing up to 14 parameters on a single instrument, depending on the combination. The instrument has a simple user interface and is constructed for field use. Several industry specific versions are available the combine all of the tests you need. This version is the Chlorine colorimeter - request pricing on other models.
HIGHLIGHTS:
~ High-precision optics
~ High accuracy and reproducibility through precision interference filter (5 nm)
~ Industry specific parameter combinations available
The MD 100 colorimeter is a single parameter colorimeter for water quality analysis. This line of rugged, waterproof instruments is lightweight and ideal for field testing or for use in the laboratory.
Chlorine is one of the most popular water quality testing parameters and the MD 100 Chlorine Colorimeter offers a testing solution to fit a wide variety of industries and applications.
This instrument is pre-programmed with two testing ranges for testing Free, Total and Combined Chlorine. Both ranges use the DPD method and utilize Lovibond Powder Pack Reagents.
Applications: Boiler Water Cooling Water Disinfection Control Drinking Water Treatment Pool Water Control Pool Water Treatment Raw Water Treatment Waste Water Treatment
The MD 100 has several key features that make it a favorite among users.
~ Waterproof Design
~ The IP 68 design of this instrument ensures that the MD 100 remains water tight for up to 1 hour at 0.1 meter.
~ Don't worry about dropping the instrument into a body of water - it floats!
~ Accurate, Reproducible Results
~ The optical system of the MD 100 utilizes LEDs and interference filters
which quickly gives you results that you can be confident in. You always measure in the spectral peak.
~ User Calibration Mode
~ A one-point calibration is possible.
~ Additionally, all MD 100 instruments have the ability to display readings directly in ABS or %T units.
~ One-time-Zero Function
~ Don't waste time waiting for your instrument to Zero after each test.
~ When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument.
~ Automatic Data Storage with Transfer Capabilities
~ The MD 100 automatically stores the last 16 readings with time and date stamp.
~ These results can be transferred to a spreadsheet using the IRiM accessory.
~ Ergonomic Design
~ Whether you're using the MD 100 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display.
~ If you're using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench.
~ Factory Programmed
~ All MD 100 instruments are supplied ready to use with up to 14 calibration curves.
~ All you need to do is select the test you need, prepare your sample and test!
~ Scroll Driven Menu System
~ The simple interface allows you to quickly reach the test you need.
~ When the instrument is turned on, it will automatically display the last test used.
SPECIFICATIONS:
Optics LEDs, interference filters (IF) and photo sensor in transparent sample chamber Wavelength range:
430 nm IF = 5 nm
530 nm IF = 5 nm
560 nm IF = 5 nm
580 nm IF = 5 nm
610 nm IF = 6 nm
660 nm IF = 5 nm
IF = interference filter
Wavelength Accuracy: ± 1 nm
Photometric Range: -2500 - 2500 mAbs
Photometric Accuracy: 3% FS (T = 20°C - 25°C)
Operation: Foil keypad
Display: backlit LCD (on keypress)
Suitable Vials: Round Cuvettes 24 mm
Calibration: factory calibration and user calibration. Reset to factory calibration possible
Interfaces: Infrared
Internal Storage: internal ring memory for 16 data sets
Power Supply: 4 micro batteries (AAA)
Battery Life Time: approx. 17 hours
Portability: Portable
Testparameter _____ Measuring Range
Chlorine HR PP_____ 0.1 - 8 mg/L Cl2
Chlorine PP ______ 0.02 - 2 mg/L Cl2
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Lovibond-Tintometer MD 100 Chlorine Portable Colorimeter or copy the following into your browser address window: labequip.com/stock/pictures/n2135.pdf
Made in Germany.
ACCESSORIES:
Comes complete with:
Instrument in plastic case
Chlorine Free Powder Packs
Chlorine Total Powder Packs
4 micro batteries (AAA)
3 round cuvettes (glass) with lid
2 cuvettes (plastic) with lid
Sealing rings
Brush
Instruction manual
Quick Start Guide
Certificate (COC)
Warranty information
Optional accessories available at additional cost:
170500 Water sampler with bottle 250 mL and lid, AF 631
1950026 Micro batteries (AAA), set of 4
197600 Multy cuvette-2, set of 12
197620 Round cuvette 24 mm diam, set of 12
197626 Sealing ring for round vials 24mm diam, set of 12
197629 Round cuvette 24 mm diam, set of 5
197635 Cleaning cloth
197665 Round cuvette 16 mm diam, set of 10
19802190 Adapter for round cuvettes 16 mm diam
19802650 Mixing cylinder, 25 ml
19802701 Fixed price service package for MD100/MD110/MD200
19802801 Service plan-3 years for MD100/MD110/MD200
215670 Verification Standard Kit MD 100 / 200
275660 Reference Standard Kit Chlorine - VARIO 0.2 and 1.0 mg/l (MD 100/110/200)
364100 Stirring rod, 13 cm length
364109 Stirring rod, 10 cm length
364120 Stirring rod, 13 cm length, set of 10
364130 Stirring rod, 10 cm length, set of 10
366150 Membrane filter set for use when preparing samples, 25 membrane filters 0.45µm, 2 syringes 20ml
375069 250 mL bottle, AF 631
380230 Brush, 11 cm length
384801 Measuring beaker, 100 ml
418951 Cuvette stand for 6 round cuvettes diam 24mm
418957 Cuvette stand for 10 round cuvettes diam 16mm
471007 Plastic funnel with handle (white)
48105510 ValidCheck Chlorine 1,5 mg/l
999750 Factory calibration certificate ISO 9001 for MD100/MD110/MD200
999855 Additionally for each method
