Lovibond-Tintometer MD 100 COD Water Tester

Product Description
***The Lovibond MD1010 colorimeter is directly comparible to the HACH DR300 Single Parameter Colorimeter***

Determination of the chemical oxygen demand index (ST-COD)

Highlights
~ ST-COD sealed tubes ready for use
~ Suppression of chloride interference up to 1000 mg/L (LR & MR) up to 10000 mg/L (HR)
Mercury free tube tests,in absence of chloride interference
4 ranges:
~ Low range: 3 - 150 mg/L, meets ISO 15705:2002
~ Middle-low range: 15 - 300 mg/L, meets ISO 15705:2002
~ Middle range: 20 - 1500 mg/L, meets ISO 15705:2002
~ High range: 200 - 15000 mg/L

The Lovibond COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration.
After adding the sample to a Lovibond COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150°C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.

Testparameter ____ Measuring Range ____ Method No.
COD HR TT ______ 200 - 15000 mg/L COD ____ M132
COD LMR TT ______ 15 - 300 mg/L COD _____ M133
COD LR TT ________ 3 - 150 mg/L COD ______ M130
COD MR TT ______ 20 - 1500 mg/L COD ______ M131
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Lovibond-Tintometer MD 100 COD Water Tester or copy the following into your browser address window: labequip.com/stock/pictures/n2174.pdf
Made in Germany.

ACCESSORIES:

COMES COMPLETE WITH:
Instrument in plastic case
Chlorine Free Powder Packs
Chlorine Total Powder Packs
4 micro batteries (AAA)
3 round cuvettes (glass) with lid
2 cuvettes (plastic) with lid
Sealing rings
Brush
Instruction manual
Quick Start Guide
Certificate (COC)
Warranty information

OPTIONAL ACCESSORIES AVAILABLE AT ADDITIONAL COST:
ValidCheck Chlorine 1,5 mg/l
Micro batteries (AAA), set of 4
Measuring beaker, 100ml
Stirring rod, 13 cm length
Stirring rod, 13 cm length, set of 10
Stirring rod, 10 cm length
Stirring rod, 10 cm length, set of 10
Mixing cylinder, 25 ml
Plastic funnel with handle (white)
Brush, 11 cm length
Water sampler with bottle 250 mL and lid, AF 631
250 mL bottle, AF 631
Round cuvette 24 mm ø, set of 12
Round cuvette 24 mm ø, set of 5
Round cuvette 16 mm ø, set of 10
Multy cuvette-2, set of 12
Cuvette stand for 6 round cuvettes Ø 24 mm
Cuvette stand for 10 round cuvettes Ø 16 mm
Adapter for round cuvettes 16 mm ø
Cleaning cloth
Sealing ring for round vials 24 mm ø, set of 12
Reference Standard Kit Chlorine-VARIO 0.2 & 1.0 mg/l Verification Standard Kit MD 100 / 200
Additionally for each method
- Membrane filter set for use when preparing samples, 25 membrane filters 0.45µm, 2 syringes 20ml

---